TWO DEFLATORS.ONE STANDARD.
Dropping your tyre pressure before hitting sand, corrugations, or rocky tracks isn't optional, it's essential. Here's the science behind why, and what it means for your rig.
AUSSIE MADE
14-DAY RETURNS
WHAT EVERY STAUN HAS
THE DNA THEY SHARE
Both the Original and Quickset are built on the same core platform: the same materials, the same accuracy, the same Aussie craftsmanship.
SIDE BY SIDE
ORIGINAL VS. QUICKSET
Not sure which one's right for you? Here's every difference at a glance.
THE ORIGINALProven. Simple. Trusted
THE QUICKSETSmarter & Faster
SIDE BY SIDE
ACCURACY
±1 PSI
±1 PSI
DEFLATION SPEED
under 3 mins (32→18 PSI)
under 3 mins (32→18 PSI)
PRESSURE RANGE
6–30 PSI
6–30 PSI
AUTO-STOP
MATERIAL
100% Brass
100% Brass
SETUP & USABILITY
BUILT-IN PSI GAUGE
SETUP METHOD
Count turns + gauge
Read reference lines directly
REFERENCE LINES
PSI Lines
SEPARATE GAUGE NEEDED
Yes, to verify
No
SWITCHING PRESSURES
Re-count turns
Dial to new PSI
DIMENSIONS & SPECS
SIZE
30mm × 15mm
30mm × 15mm
WEIGHT (EACH)
32g
32g
CARRY POUCH
Leather
Leather
AVAILABILITY
WHERE TO BUY
Staun + retailers
Staun + retailers
BEST FOR
Set-and-forget simplicity
Frequent trips, varied terrain
GUARANTEE
2 years
2 years
THE ORIGINAL STAUNIES
SHOP ORIGINAL
SIMPLE. PROVEN. TRUSTED SINCE 1998.
The deflator that started it all. Screw it on, walk away, come back to perfectly deflated tyres. No batteries, no electronics just precision-machined brass that works every single time.
Fully adjustable 6–30 PSI range
Pre-set with reference lines on the piston
Manual dual-option — lift up at any 1 PSI to abort/release
THE QUICKSET — NEW
SHOP QUICKSET
SAME PROVEN GUTS. SMARTER SETUP.
Everything drivers love about the Originals, with a built-in PSI gauge that makes setup almost foolproof. See exactly what pressure you're setting — no guessing, no counting turns, no separate gauge needed.
Built-in PSI reference lines
Switch between sand, corrugations & highway in seconds
No separate tyre gauge needed
Same 100% brass platform as Original
Ideal for frequent trips & varied terrain types
TECHNICAL SPECS
BUILT TO PERFORM
COMMON QUESTIONS
STILL NOT SURE?
We get it. Here are the questions we hear most.
WHAT'S THE MAIN DIFFERENCE BETWEEN ORIGINAL AND QUICKSET?
The Quickset has a built-in PSI gauge so you can dial directly to the pressure you're setting — no separate gauge or counting turns needed. The Original uses the same proven brass platform and accuracy, just with a count-turns method.
DO I NEED ANY TOOLS TO USE STAUN DEFLATORS?
No — both models thread on by hand and self-stop at the pressure you set. No spanners, no batteries, no fuss.
DO THEY WORK ON ALL TYRE VALVES?
Yes. Staun deflators fit standard Schrader valves found on every 4WD, ATV, motorbike, and trailer tyre.
DO I NEED TO RESET THEM EVERY TIME?
The Original needs a re-count of turns when you change pressure. The Quickset just dials to the new PSI with the reference lines.
WHAT IF MY CURRENT PRESSURE IS ONLY SLIGHTLY ABOVE THE PRESET?
Both deflators self-stop at your set pressure. If your starting pressure is already at or below the preset, no air will release.
WHERE CAN I BUY THE QUICKSET?
The Quickset is a Staun-exclusive product, available only through staun.com.au. The Original is also stocked at Supercheap Auto, Anaconda, and select 4WD retailers Australia-wide.